Readers ask: How long can a vinyl record be?

What is the maximum length of a vinyl record?

There is no absolute upper limit for the playing time of an LP (defined here as a 12-inch vinyl record intended to be played at a speed of 33 1⁄3 rpm). The standard length of an LP has long been 40 minutes (20 minutes per side), because above that the grooves become too narrow to accommodate every aspect of the sound.

How many minutes can you fit on a 12-inch record?

Each side of a 12-inch LP could play for about 22 minutes.

How long can a 7 record be?

7″ Records (often referred to as 45’s) can be cut at 45 RPM or 33 1/3 RPM. When cut at 33 1/3 you can hold approximately 6:00 minutes per side. When cut at 45 you can hold approximately 4:30 minutes per side. These numbers are not set in stone, just a suggested maximum.

What are the 3 sizes of records?

Vinyl records come in three speeds: 33 1/3 rpm (often just called a “33”), 45 rpm and 78 rpm.

When did vinyls die?

Vinyl records were overtaken in sales by CDs in 1988, and were no longer in mass production after 1989.

Can you wear out a vinyl record?

No. Abuse wears out vinyl. Taking proper care of vinyl will ensure long life. Scientifically speaking, every time you play a vinyl, you are slightly degrading it.

What was on the first 12 inch record?

The first twelveinch LP (containing only one track per side), was Beethoven’s Symphony No. 5 In C Minor by the Philadelphia Orchestra conducted by Leopold Stokowski.

You might be interested:  Often asked: How early can you do a paternity test when pregnant?

Does vinyl sound better than CD?

The difference between the loudest and softest sounds an LP can play is about 70 decibels (dB). CDs can handle over 90 dB. In practical terms, this means that CDs have more than 10 times the dynamic range of LPs.

How much does it cost to press a vinyl record?

This can range from $150$230 per side ($300 – $460 per record) with the average being around $200 per side ($400 per record). We looked around at a few different pressing plants to get a ballpark figure of what a vinyl run costs.

How long is a 10 inch record?

10Records (same size as classic 78’s) can be cut at 45 RPM or 33 1/3 RPM (we can cut them at 78 too, but few would be able to listen to them). When cut at 33 1/3 you can hold approximately 12:00 minutes per side. When cut at 45 you can hold approximately 9:00 minutes per side.

What is a 7 inch record?

7 inch records (also called “45s”) are referred to by their playback speed of 45 rpm and their standard diameter of 7 inches. At 45 rpm they hold around 4-6 minutes per side. 45 rpm is the most common speed for 7 inch records.

What is standard weight vinyl?

Standard 12 inch vinyl records weigh around 140 grams. Heavyweight vinyl is most often 180 gram, but can sometimes weigh 200 grams and even 220 grams.

Can a record player play all sizes?

All record players do not play every single size of vinyl record. All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.

You might be interested:  How long after you get a tattoo can you donate blood?

What does LP mean?

The LP (Long Play), or 33 1⁄3 rpm microgroove vinyl record, is a format for phonograph (gramophone) records, an analog sound storage medium. Introduced by Columbia Records in 1948, it was soon adopted as a new standard by the entire record industry.

What is standard record size?

Records come in three standard sizes: 7-inch, 10-inch, and 12-inch. At a certain point, records can become cramped with grooves and have to expand in size to accommodate the extra music play while maintaining the quality of the audio.

Leave a Reply

Your email address will not be published. Required fields are marked *